Jump to content


Popular Content

Showing content with the highest reputation since 01/20/2021 in Posts

  1. 1 point
    I discovered the reason for that error when trying to import the MarkEzd.dll Has a direct relationship with the archives Lmc1.dll DataMgr.dll the latest version of EZCAD2 published in the community is a 2.14.11 and the file LMC1.dll has a modification date 2019-07-02 this version of LMC1.dll does not have some methods that the version of the MarkEzd.dll published in the community needs the date modified of MarkEzd.dll published in the community is 2011-12-06 we need to find versions of markEzd.dll, Lmc1.dll DataMgr.dll. that are compatible with each other
  2. 1 point
    How do I register the EZCAd3 software, or acquire a serial number that it is asking for?
  3. 1 point
    Hi , I am having trouble find much relevant information on using the program (EzCad3) and would appreciate any leads on tutorials or written information. Just getting in touch with other uses would help. Always happy to share tips and any information I have gleaned. Cheers. Bill.
  4. 1 point
    That message only appears when you are not connected to the laser or you are connected but the laser is not fully powered up. Double check you have a good wire and connection from your laptop to the laser control card and the laser is fully powered up. Then open software and the message should not appear.
  • Create New...