Search the Community
Showing results for tags 'windows driver'.
Found 3 results
Hi, Ok, so i start the laptop, turn on the laser's key and then the laser, the pc recognises the laser with no problem BUT when i run EZ Cad2 there is a problem, the software "agreement" page opens but then when i click "ok" it disappears like normal but does not come back, after waiting a few minutes i try again but the software says "software is open" (which it isn't...) so now i cannot use the laser, i have uninstalled the driver and reinstalled, no difference, it does this with versions 09,10 and 11 of the software... Oh yes, if i unplug the laser usb cable then the software goes straight to demo mode, even a clean shutdown in demo does the same thing...
I bought a 30W Laser Engrave machine almost 4 years ago. It works perfect. This week my Laptop broke down, the laptop I only use for this Laser Engravement machine. The HDD is defect and I can't start the Laptop plus I can't get data out of the disk. This means that I have to install the drivers and EZCAD again. EZCAD is not a problem. The problem is that I don't have the drivers for the Laser Machine Controller Board and I don't have drivers for the build in dongle called USB Gongle V.1.74 Can anyone help? Please see the pictures showing the machine, the controller board and the Max Fiberlaser