Femto-10 | Femto-50 | Femto-200 | Femto-400 | Femto-1000 | |
Product model | Femto-IR-10-10 | Femto-lR-50-40 | Femto-IR-200-40 | Femto-IR-400-60 | Femto-IR-1000-100 |
Wavelength | 1035+5 nm | ||||
Average Power | 10 W | 40 W | 40 W | 60 W | 100 W |
Pulse Energy | 10 μJ | 50 μJ | 200 μJ | 400 μJ | 1 mJ |
Burst Pulse Energy | 20 μJ | 200 μJ | – | 1 mJ | – |
Rep Rate | Single-Shot to 1 MHz | Single-Shot to 800 kHz | Single-Shot to 200 kHz | Single-Shot to 150 kHz | Single-Shot to 100 kHz |
Pulse Width | <250 fs to 10 ps | <500 fs to 6 ps | |||
Beam Quality | M²≤1.3 (Typical <1.2) | ||||
Beam Divergence | <1 mrad,2θ | <1.2 mrad,2θ | |||
Beam Roundness | ≥90% | ≥85% | |||
Beam Diameter | 2.5±1 mm, 1/e² | 3±1 mm, 1/e² | |||
Power Stability | <2% RMS | ||||
Polarization Ratio | 100:1 | ||||
Polarization | Linear | ||||
Working Temperature | 10 to 30°C | ||||
Cooling | Water Cooling | ||||
Equipment Selection | FemtoA-IR-10-10 Femto-GN-4-4 | Femto-IR-20-20 Femto-IR- 40-40 Femto-GN-8-8 Femto-GN-16-16 Femto-GN-20-16 | Femto-GN-100-15 Femto-UV-20-10 | – | – |
This series of products adopts integrated optical and electrical design, pulse width less than 300 fs, single pulse energy up to 400 μJ, and supports Burst Mode mode, which can be widely used in semiconductor wafer processing, glass and other hard and brittle materials processing or Welding, processing and processing of polymer materials, medical device manufacturing, ceramics and polymer processing.